Skip to content
CSG30/Pt

NanoTechnology Solutions

CSG30/Pt

NEW PRODUCT! for CONTACT/SEMICONTACT modes CSG30 series with Pt conductive and reflective coatings, resonant frequency 26-76kHz, force constant 0.6-2 N/m. Specially designed for the applications when it's not clearly defined which mode should be used for sample investigation or when it's necessary to provide measurements in both modes of the same sample area without tip remove.

Price on request

Available on back-order

Request a quote Ask about this product

Description

High Resolution CONTACT/SEMICONTACT “GOLDEN” Silicon Cantilevers CSG30 series with PtIr conductive coating.

Due to the medium meanings of force constant and resonant frequency the probes can be used in contact, semicontact and noncontact modes. Specially designed for the applications when it’s not clearly defined which mode should be used for sample investigation or when it’s necessary to provide measurements in both modes of the same sample area without tip remove.

CSG30/Pt series specification
Material Single Crystal Silicon, N-type, 0.01-0.025 Ohm-cm, Antimony doped
Chip size 3.4x1.6x0.3mm
Reflective side PtIr
Conductive coating PtIr (25nm), Cr adhesion layer (25A)
Cantilever number 1 rectangular
Tip curvature radius ~ 35nm
Available CSG01 probe bare, tipless, with Al reflective coating

Cantilever specification:

  1. Cantilever length, L±5µm: 190
  2. Cantilever width, W±3µm: 30
  3. Cantilever thickness, T±0.5 µm: 1.5
  4. Resonant frequency, kHz: 26 (Min), 48 (Typical), 76 (Max)
  5. Force constant, N/m: 0.13 (Min), 0.6 (Typical), 2 (Max)

NanoTechnology Solutions is the exclusive distributor of these products in Australia and New Zealand.

Options

Package size SKU Price (ex GST) Quote
15 G2215 On request Quote for CSG30/Pt 15
50 G2250 On request Quote for CSG30/Pt 50