Skip to content
HA_FM/W2C+

NanoTechnology Solutions

HA_FM/W2C+

High Accuracy High Resonance frequency noncontact AFM probes HAFM series with stable and wear-resistant long lifetime W2C conductive coating, each chip has 2 cantilevers,resonant frequency 114 kHz / 77 kHz, force constant 6 N/m / 3.5 N/m. W2C+ conductive coating is modified to provide better stability in high humidity conditions

From A$969.00

Indicative price in Australian dollars, excluding GST

Available on back-order

Description

Looking for the World’s best Conductive AFM? Click here.

ETALON is a new series of excellent composite AFM probes. In terms of quality-to-price ratio, it has no analogues in the world market. NanoTechnology Solutions is the exclusive distributor of these probes in Australia and New Zealand.

High Accuracy High Resonance frequency non-contact AFM probes HA_FM series with stable and wear-resistant long lifetime W2C conductive coating.

The main advantages of W2C coated probes are:

  • Hard coating which stays stable at applied high voltages and flowing currents at the contact point ‘tip-sample’ which cannot be received with standard metal coated probes (Fig.1-3);
  • High conductivity (close to metal conductivity);
  • Typical curvature radius less than 35nm;
  • W2C+ was modified by volume doping with anticorrosion elements thus providing long-term performance in high humidity conditions.

Experiments, carried out in december 2015 by NT-MDT Spectrum Instruments, approvedgreat stability of W2C+ coated probes under high voltage, current and tip-sample pressure. AFM cantilevers showed to be able measure current of several mkA during the whole scan without any degradation. The same excellent performance continued after 100 I-V curves by the range +/- 10V.

Specification of HA_FM/W2C probe series:

Material Polysilicon lever, monocrystal silicon tip
Chip size 3.6 x 1.6 x 0.4 mm
Reflective side

Tip side

Au (20-30 nm)

W2C (20-30 nm)

Cantilever number 2 rectangular
Tip shape Octahedral at the base, conic on the last 200 nm
Tip cone angle φ 30 degrees on the last 200 nm
Full tip height ≥10 µm
Pedestal/tip ratio 1:1
Tip curvature radius less than 35 nm
AFM probe
Cantilever type A B Typical dispersion
Length, L (µm) 223 183 ± 2
Width, W (µm) 34 34 ± 3
Thickness, H (µm) 3 3 ± 0.15
Force Constant (N/m) 3.5 6 ±20%
Resonant frequency (kHz) 77 114 ± 10%

Options

Package size SKU Price (ex GST) Quote
15 E1115 A$969.00 Quote for HA_FM/W2C+ 15
50 E1150 A$2,641.00 Quote for HA_FM/W2C+ 50