DVIA-MLP1000 Active Isolation for Thermo Fisher SEMs
DAEIL DVIA-MLP1000: a 158 mm-high active isolation platform made for Thermo Fisher Scientific SEMs, installed from the side without lifting.
Key features
- Made for Thermo Fisher SEMs
- Matched to the microscope's dimensions and mounting points; custom configurations for other models.
- Side-push installation
- No crane or lifting; four isolators bolt to the base-frame caster positions.
- Low profile
- 158 mm high, fits existing enclosures without changes.
- Six axes from 0.5 Hz
- Feedback and feedforward control; 80–90% isolation at 1 Hz.
- Sensing
- 11 geophone velocity sensors; detection extended to 0.3 Hz.
- Magnetically quiet
- Magnetic field below 0.05 μT.
Specifications
From DAEIL Systems' product page.
| Dimensions | 874 × 846 × 158 mm |
|---|---|
| Maximum payload | 1,500 kg |
| Control | Feedback and feedforward |
| Degrees of freedom | 6 (X, Y, Z, θx, θy, θz) |
| Active isolation bandwidth | 0.5–200 Hz |
| Vibration isolation | 80–90% at 1 Hz |
| Actuator force | Electromagnetic; 40 N vertical, 20 N horizontal |
| Sensor | Geophone, 2.55 V/in/s (100.4 V/m/s) ±10% |
| Levelling accuracy | ±0.1 mm |
| Controller | External |
| Certification | CE, TÜV |
| Power | 100–260 V AC, 50/60 Hz |
| Air | 4–6 bar, 10 L/min |
| Environment | 5–50 °C, 20–90% RH |
| Models listed by DAEIL | Aquilos, Apreo, Helios 5, Hydra, Nova NanoSEM, Prisma, Quattro S, Scios, Teneo, Verios 5, Versa 3D, Centrios |
|---|
